Reflective glass beads powder

Reflective glass beads powder

Other keywords: reflective powder, reflective glass micro beads, reflective pigment, glass microsphere, reflect light pigment, glass microbeads reflect light powders

Color: grey, white

Grain size: 150-200mesh, 200-300mesh, 300-400mesh, 400-500mesh, 500-700mesh or make as requests

Products feature: 1.high brightness 2. High fluidity 3. Low Specific gravity 4. Symmetrical Particle size

Refractive index: 1.93nd;

Specific Gravity:4.2/cm3

  • 描述
  • Inquiry

Test results by chemical method (unit:mg/kg)

EN71PART3:1994+A1:2000+AC:2002MIGRATION OF CERTAN ELEMENT

ELEMENT                     PPM       MDL     LIMIT

Soluble Lead(Pb)              ND       5       90

Solunble Antimony(Sb)    ND       5       60

Soluble Arsenic(As)         ND       2.5     25

Soluble Barium(Ba)           642       10       1000

Soluble Cadmium(Cd)      ND       5       75

Soluble Chromium(Cr)     ND       5       60

Soluble Mercury(Hg)       ND       6       60

Soluble Seienium(Se)       ND       10     500

Note:1)ppm=mg/kg     2)ND:Not detected

3)MDL-Merhod Detection Limit

 

Application:

Widely used in screen printing (can be printed, printing printed trademark of a class), making reflective paint, reflective paint, reflective fabric, reflective tape, reflective film and all kinds of reflective fabric, reflective signs,

Core material reflective logo, advertising materials, clothing materials, standard stadium runway, shoes, hats, bags, land and air rescue supplies and other new optical functional composite materials, it has reflective properties of the regression and the resulting strong retro-reflective effect, no external power supply, can be widely used in roads, ports, mining, fire and other fields, as a safety flags, greatly enhance the user’s safety and reliability.

Use method:

Use one: screen printing method

A water-based screen printing method: reflective powder reflective directly added to the aqueous slurry, adding appropriate additives to enhance fastness, tune evenly printing, printing.

Water-based screen printing method two: reflective powder directly into the transparent water-based ink, plus 2% of water-based special effects catalyst evenly tone printing, printing. (This method is better)

Water-based screen printing method three: reflective powder slurry directly into transparent, appropriate to add additives to enhance fastness, tune evenly printing, printing.

Oily screen printing method one: reflective powder directly into the varnish, even tone, appropriate to add additives to enhance fastness, you can print, printing. (This method is better)

Oily Screen Act II: reflective powder directly into the ink, made of reflective ink, silk screen or brush onto fabric or other items.

Oily screen printing method three: first primer topcoat reflective printing paste — — drying curing paste printing, printing thinner layer thickness to 30 microns to 50 microns is appropriate to ensure that the reflective powder can and a half. exposed on the surface, to produce reflective effect.

According to use, the use of thickness ranging from particle size, to obtain a variety of reflective effect. (Particle size range, reflecting the better)

Use the above method, simple operation, easy to master.

Use two: spraying

1 first reflective paint spray primer, to be reflective paint dry, then spray-reflective finish. If the cement surface construction, the proposed two-reflective spray paint better.

2 recommends using W-71-type gun (nozzle ¢ 1.50 mm) using a spray gun pressure primer about 2.0Kg / cm2, paint spray gun pressure around 3.0kg / cm2.

3.guns and surface construction need to keep 18cm, gun angle 45 °, paint a thin film to have obtained good results. For unknown substrate, a small area prior to trial

4 Do not rain and fog in the snow and other inclement weather construction, will affect fastness.

Notice:

Before 1. construction surface to be cleaned, the surface free of grease and dry.

Reflective and reflective paint primer must be stirred before 2 construction uniform; painting process to keep stirring to prevent reflective powder precipitation.

Reflective pulp preparation: According to how much amount will be transferred into a paste with a solvent (cyclohexanone) the reflective powder weighing, and then added to the transparent printing paste, adjusting uniform use. When printing, printing thinner layer thickness to 30 microns to 50 microns is appropriate to ensure that the powder can Banlu reflective surface to produce reflective effect. According to use, the use of thickness ranging from particle size, to obtain a variety of reflective effect. (Particle size range, reflecting the better). Add the amount depending on how many add reflective brightness.

The above technical parameters, the practical application of summary from various industries, for reference only, without any legal basis. Make each user before use, must themselves first test proofing before production confirmation, or peril.

Contact Us