A making method of rare earth photoluminescence safety paint

Raw material:
Styrene-acrylic emulsion,rutile titanium dioxide,talcum powder,mica powder,luminous pigment,glycol
pigment dispersant (agent),defoamer,Thickener

Preparation method
Firstly, measure the emulsion, and then put a certain amount of styrene-acrylic emulsion into a beaker; Then, all kinds of additives are measured separately, and then the additives except defoamer are put into another beaker, fully stirred and mixed into mixed additives; Add defoamer into the mixed additives, mix evenly, slowly add people into half of the emulsion, and continue to stir for 10min for later use; Putting the weighed luminescent pigment, titanium dioxide, talcum powder and mica powder into an empty cup, initially stirring uniformly, adding the other half emulsion, stirring uniformly, and grinding and refining; Then adding the mixed auxiliary agent and emulsion mixed before into the ground emulsion, pigment and filler mixture again; Continuously stirring for 30min; Filtering once, and making the luminous coating finished product.
Characteristic
This rare-earth acrylic luminescent coating realizes the luminescent function by absorbing various visible light, so it is called photoluminescence Paint. Photoluminescent coatings can provide good long-term low-degree emergency lighting, longer-lasting luminous indication and decorative beautification effects. The coating adopts alkaline earth aluminate luminescent material with new rare earth efficient luminescent material doping technology, which has long luminous time, high luminous intensity, no toxicity and radiation, and has good decorative effect.
Application
This product is mainly used for road signs, billboards, billboards and so on.